PRECUTLY — Precut PPF & Window Tint Kits

Installation Guides

Video walkthroughs and written instructions for installing precut film — with the tools you need and an honest estimate of how long it takes.

PPF guidesTint guidesTint laws by state

Installation

Frequently Asked Questions

What does a precut PPF kit include?
Film only. Each kit ships with LLumar paint protection film panels plotted for your specific vehicle and coverage, labeled by position. An installation tool kit is available as an add-on. Installation is not included.
Which package should I choose?
The Front Bumper Kit covers the single most vulnerable panel. The Partial Front PPF Kit adds partial hood, partial fenders and mirror caps. The Full Front PPF Kit is the most popular choice and covers full hood, bumper, full fenders, mirrors and headlights. The Track Pack PPF Kit adds rockers and high-impact side areas, and the Full Body PPF Kit covers the applicable painted exterior.
Why does the price change by vehicle?
Larger vehicles use significantly more film. Prices shown are starting prices; the exact price appears once you select year, make, model and trim, based on pattern size, film consumption, number of panels and film type.
Which precut tint kits can I order?
Choose Front Two Windows, Full Car, Sun Strip or Front Windshield. The Full Car kit covers the side and rear glass; coverage varies by vehicle, with rear door and quarter glass included only where applicable and supported. The front windshield is sold separately.
What size is the sun strip?
Choose a 6-inch strip, an 8-inch strip or a strip cut to your vehicle's AS1 line. Confirm local tint laws before selecting a size or shade.

Installation Video Library

Rvinyl Precut Paint Protection Hood Film Tutorial with Justin Pate

Rvinyl

Written steps

  1. Wash and decontaminate the panel; remove wax, grease and debris before applying film.
  2. Match each labeled precut piece to its panel and dry-check alignment without removing the liner.
  3. Prepare slip and tack solutions using the instructions supplied with your kit. Wet clean hands, the panel and adhesive while positioning.
  4. Align edges and features, then squeegee from the anchor outward. Avoid overstretching and keep the adhesive clean.
  5. Inspect edges and remaining moisture before letting the film settle. Practice on the included practice piece before the vehicle.
General technique video, not a Precutly product video. Your kit is LLumar, precut for your vehicle. The steps are the same.Source: Rvinyl. Vehicle make/model/year in the footage is not yet verified; this video is not vehicle-specific fitment evidence.

How to Install Precut Paint Bumper Protection

Rvinyl

Written steps

  1. Wash and decontaminate the panel; remove wax, grease and debris before applying film.
  2. Match each labeled precut piece to its panel and dry-check alignment without removing the liner.
  3. Prepare slip and tack solutions using the instructions supplied with your kit. Wet clean hands, the panel and adhesive while positioning.
  4. Align edges and features, then squeegee from the anchor outward. Avoid overstretching and keep the adhesive clean.
  5. Inspect edges and remaining moisture before letting the film settle. Practice on the included practice piece before the vehicle.
General technique video, not a Precutly product video. Your kit is LLumar, precut for your vehicle. The steps are the same.Source: Rvinyl. Vehicle make/model/year in the footage is not yet verified; this video is not vehicle-specific fitment evidence.

LLumar PPF - Door Cups & Edge Guards

LLumar Films

Written steps

  1. Wash and decontaminate the panel; remove wax, grease and debris before applying film.
  2. Match each labeled precut piece to its panel and dry-check alignment without removing the liner.
  3. Prepare slip and tack solutions using the instructions supplied with your kit. Wet clean hands, the panel and adhesive while positioning.
  4. Align edges and features, then squeegee from the anchor outward. Avoid overstretching and keep the adhesive clean.
  5. Inspect edges and remaining moisture before letting the film settle. Practice on the included practice piece before the vehicle.
General technique video, not a Precutly product video. Your kit is LLumar, precut for your vehicle. The steps are the same.Source: LLumar Films. Vehicle make/model/year in the footage is not yet verified; this video is not vehicle-specific fitment evidence.

How to Install PPF for Beginners - Complete Step-by-Step Tutorial

ENCORE Window Tinting & Paint Protection Film

Written steps

  1. Wash and decontaminate the panel; remove wax, grease and debris before applying film.
  2. Match each labeled precut piece to its panel and dry-check alignment without removing the liner.
  3. Prepare slip and tack solutions using the instructions supplied with your kit. Wet clean hands, the panel and adhesive while positioning.
  4. Align edges and features, then squeegee from the anchor outward. Avoid overstretching and keep the adhesive clean.
  5. Inspect edges and remaining moisture before letting the film settle. Practice on the included practice piece before the vehicle.
General technique video, not a Precutly product video. Your kit is LLumar, precut for your vehicle. The steps are the same.Source: ENCORE Window Tinting & Paint Protection Film. Vehicle make/model/year in the footage is not yet verified; this video is not vehicle-specific fitment evidence.

How to Install a Complete Precut Window Tint Kit

Rvinyl

Written steps

  1. Check state law and the combined glass-plus-film light transmission before selecting shade.
  2. Clean the glass, seals and surrounding area thoroughly; identify each labeled precut piece.
  3. Check film orientation and position on the outside for shaping. Curved rear glass may need heat shrinking before installing on the inside.
  4. Wet the inside glass and adhesive, align the piece and squeegee moisture outward without creasing the film.
  5. Check edges and follow the supplied curing and window-use instructions. Use the practice piece first if you are new to tint.
General technique video, not a Precutly product video. Your kit is LLumar, precut for your vehicle. The steps are the same.Source: Rvinyl. Vehicle make/model/year in the footage is not yet verified; this video is not vehicle-specific fitment evidence.

Pre Cut Tint Kit Front Window Installation--Any Vehicle

Install Proz

Written steps

  1. Check state law and the combined glass-plus-film light transmission before selecting shade.
  2. Clean the glass, seals and surrounding area thoroughly; identify each labeled precut piece.
  3. Check film orientation and position on the outside for shaping. Curved rear glass may need heat shrinking before installing on the inside.
  4. Wet the inside glass and adhesive, align the piece and squeegee moisture outward without creasing the film.
  5. Check edges and follow the supplied curing and window-use instructions. Use the practice piece first if you are new to tint.
General technique video, not a Precutly product video. Your kit is LLumar, precut for your vehicle. The steps are the same.Source: Install Proz. Vehicle make/model/year in the footage is not yet verified; this video is not vehicle-specific fitment evidence.

How to Heat Shrink a Rear Windshield Step-by-Step) + Why You MUST Shrink Tint Film

Tint Academy - Leading Window Tint Courses

Written steps

  1. Check state law and the combined glass-plus-film light transmission before selecting shade.
  2. Clean the glass, seals and surrounding area thoroughly; identify each labeled precut piece.
  3. Check film orientation and position on the outside for shaping. Curved rear glass may need heat shrinking before installing on the inside.
  4. Wet the inside glass and adhesive, align the piece and squeegee moisture outward without creasing the film.
  5. Check edges and follow the supplied curing and window-use instructions. Use the practice piece first if you are new to tint.
General technique video, not a Precutly product video. Your kit is LLumar, precut for your vehicle. The steps are the same.Source: Tint Academy - Leading Window Tint Courses. Vehicle make/model/year in the footage is not yet verified; this video is not vehicle-specific fitment evidence.

How to Install Precut Window Tint | 3M Authorized Trainer Shows Full TrueLine Kit + Heat Shrinking

Trueline Automotive

Written steps

  1. Check state law and the combined glass-plus-film light transmission before selecting shade.
  2. Clean the glass, seals and surrounding area thoroughly; identify each labeled precut piece.
  3. Check film orientation and position on the outside for shaping. Curved rear glass may need heat shrinking before installing on the inside.
  4. Wet the inside glass and adhesive, align the piece and squeegee moisture outward without creasing the film.
  5. Check edges and follow the supplied curing and window-use instructions. Use the practice piece first if you are new to tint.
General technique video, not a Precutly product video. Your kit is LLumar, precut for your vehicle. The steps are the same.Source: Trueline Automotive. Vehicle make/model/year in the footage is not yet verified; this video is not vehicle-specific fitment evidence.